|
|
6.5L Turbo-Master Wastegate Controller
Choose A Product Option Below
| Model:: |
|
Product Description
The Turbo-Master is a fully independent, spring actuated wastegate boost controller. It bypasses the factory vacuum canister to provide a much better and controllable boost curve. The Turbo-Master when combined with the Max-E Tork programming will run 14-15 PSI under full throttle. We do recommend using the Turbo-Master along with our Max-E Tork program as the factory tune does not like to see more than 8 psi.
The factory wastegate starts to leak boost pressure around 40% of the peak boost pressure which hurts performance. The Turbo-Master does not bleed off boost pressure under the set max which till provide a quicker spool time, more turbo efficiency, more boost, and more power.
The Turbo-Master is a simple bolt on upgrade; easily installed in 20-30 minutes.
What's Included?
1992-1995: Turbo-Master wastegate, hardware, and vacuum check ball.
1996-2000: Turbo-Master wastegate, hardware, and vacuum check ball.
VAN / H1 / HMV: Turbo-Master wastegate, hardware, and vacuum check ball.
|
|