|
3" Kit
Ever wonder if you have a boost leak or you know you have one, but can't find it? We finally have the tool needed to locate all boost leaks, no matter how small in minutes. This is a great tool to use anytime you have opened the system for anything. Even the smallest of leaks (1-3lbs) can cause tremendous loss of low end, slower tubo spool, and higher EGT's. Simply connect this device to the inlet of the turbocharger and pressurize with a standard compressor to 10 psi to 20 psi. You will hear even the tiniest of leaks in seconds.
Make sure you choose the correct size tool for your turbo. Simply measure the outside diameter of the inlet of the turbo. Most stock turbos are this size.
Bob,
Gotta give you credit! I've been chasing down a leak in my Turbo system for what seemed forever! Found 1 major, 1 minor, and the MAP sensor was even leaking! Restored 8lbs. of boost and throttle response!
Thanks, Mike G.
|
